Vista Flex Seal +
(2K Acrylic Cementitious Waterproofing Coating)
Description
Vista Flex Seal+ is a cementitious waterproofing coating that comes as a ready-to-use two-component system—comprising carefully graded aggregates and selected acrylic polymers. It is highly recommended for waterproofing concrete.
Advantages
- Easy to apply by brush
- Exhibits good waterproofing characteristics
- No additional water required to make the slurry
- Pre-batched components
- Can be used on hairline cracks
- Quick mixing
- Very good adhesion with substrates
- Non-corrosive
- Can be used for potable water contact
- Protects concrete against water penetration, chloride, and carbonation
Area of Application
Vista Flex Seal+ is recommended for use in structural concrete, particularly in:
- Basements
- Roof slabs and screeds
- Water tanks & water retaining structures
- Swimming pools, toilets, water retaining structures
- Internal & external plastering
- Bathrooms, balconies, sumps, and drains
- All masonry surfaces (internal and external)
- Basements, tunnels, machinery pits, cisterns, reservoirs
Properties
| Compressive Strength at 27°C | 3 days - 2.2 N/mm² 28 days - 21 N/mm² |
| Tensile Strength | 4.56 N/mm² after 14 days exposure |
| Mixing | Used as slurry - Part A : Part B = 1:4 (by weight) |
Safety and Precautions
- In case of eye contact, wash with plenty of clean water and seek medical advice.
- If swallowed, seek medical attention immediately. Do not induce vomiting.
- In case of skin contact, rinse with clean water, then wash with soap. Do not use solvent on the affected area.
- Avoid contact with skin and eyes. Do not ingest.
- Ensure adequate ventilation and avoid inhaling vapors.
- Wear protective clothing, gloves, and eye protection.